From 30f41c02aec763d32e62351452da9ef582bc3472 Mon Sep 17 00:00:00 2001
From: 3gg <3gg@shellblade.net>
Date: Fri, 6 Mar 2026 13:30:59 -0800
Subject: Move contrib libraries to contrib repo

---
 contrib/SDL-3.2.8/src/hidapi/udev/69-hid.rules | 36 --------------------------
 1 file changed, 36 deletions(-)
 delete mode 100644 contrib/SDL-3.2.8/src/hidapi/udev/69-hid.rules

(limited to 'contrib/SDL-3.2.8/src/hidapi/udev/69-hid.rules')

diff --git a/contrib/SDL-3.2.8/src/hidapi/udev/69-hid.rules b/contrib/SDL-3.2.8/src/hidapi/udev/69-hid.rules
deleted file mode 100644
index 02d6a2c..0000000
--- a/contrib/SDL-3.2.8/src/hidapi/udev/69-hid.rules
+++ /dev/null
@@ -1,36 +0,0 @@
-# This is a sample udev file for HIDAPI devices which lets unprivileged
-# users who are physically present at the system (not remote users) access
-# HID devices.
-
-# If you are using the libusb implementation of hidapi (libusb/hid.c), then
-# use something like the following line, substituting the VID and PID with
-# those of your device.
-
-# HIDAPI/libusb
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="003f", TAG+="uaccess"
-
-# If you are using the hidraw implementation (linux/hid.c), then do something
-# like the following, substituting the VID and PID with your device.
-
-# HIDAPI/hidraw
-KERNEL=="hidraw*", ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="003f", TAG+="uaccess"
-
-# Once done, optionally rename this file for your application, and drop it into
-# /etc/udev/rules.d/.
-# NOTE: these rules must have priority before 73-seat-late.rules.
-# (Small discussion/explanation in systemd repo:
-#  https://github.com/systemd/systemd/issues/4288#issuecomment-348166161)
-# for example, name the file /etc/udev/rules.d/70-my-application-hid.rules.
-# Then, replug your device or run:
-# sudo udevadm control --reload-rules && sudo udevadm trigger
-
-# Note that the hexadecimal values for VID and PID are case sensitive and
-# must be lower case.
-
-# TAG+="uaccess" only gives permission to physically present users, which
-# is appropriate in most scenarios. If you require access to the device
-# from a remote session (e.g. over SSH), add
-# GROUP="plugdev", MODE="660"
-# to the end of the udev rule lines, add your user to the plugdev group with:
-# usermod -aG plugdev USERNAME
-# then log out and log back in (or restart the system).
-- 
cgit v1.2.3